Hem » Optik » Baser / Ringar » Warne M6T3-20MOA 20 Moa rail Tikka T3/ T3x

Warne M6T3-20MOA 20 Moa rail Tikka T3/ T3x

1795,00 SEK

Fri frakt över 999 kr   |   Snabba Leveranser   |   Nöjd kund-garanti

Beskrivning

M6T3-20MOA Tikka T3 1 Piece Tactical Rail 20MOA

Description
Maxima M6T3-20MOA Tikka T3 1 Piece 20MOA
Machined from solid steel in both standard and 20 MOA configurations, Warne Tactical Rails are designed around the Mil-Spec Picatinny style rail system and provide a strong and true platform for optics mounting.

Warne Tactical Rails allow the use of Picatinny or standard Weaver style rings.
Constructed of solid steel and machined in both standard and 20MOA configurations, matte black only.
Cross slots feature the 1913 Mil-Spec design.
Bases securely mount to your gun with T-15 Torx style screws, 25 in/lb. of torque recommended.

Visually inspect your firearm's receiver for burrs around the screw holes and remove if necessary. Remove all oil and grease from the holes in the receiver, the base screws and contact surfaces. Place the scope mount base(s) on the receiver. Check for proper fit and alignment. Using a T-15 wrench (supplied with WARNE rings) loosely install the supplied Torx 15 screws. If base(s) fit properly, firmly tighten screws.* WARNE recommends 25 in/lb torque. *WARNE recommends the use of a REMOVABLE thread locking compound for best results.

Läs mer

Specifikationer

Artnr: M6T3-20MOA
Lagerstatus: I lager

Dokument

Dokument (0)